Brother HL-1870N - Install the Printer; For All Users

HL-1850/1870N SERVICE MANUAL
2-3
3. INSTALL THE PRINTER
You need to implement hardware setup and driver installation to use the printer.
Firstly, identify the Operating System on your computer. (Windows
®
95/98/Me, Windows NT
®
4.0, Windows
®
2000/XP and Macintosh)Then, purchase the appropriate interface cable
(Parallel, USB or Network) for your computer. Most existing parallel cables support bi-
directional communication, but some might have an incompatible pin assignment or may not be
IEEE 1284-compliant.
The installation programs for the hardware setup and driver installation are contained on the
supplied CD-ROM.
3.1 For All Users
For Windows



users
Turn on the PC power. Insert the supplied CD-ROM into the CD-ROM drive. The opening screen will
appear automatically
NOTE:
If the opening screen does not appear; click Start and select Run. Then, enter the CD-drive
letter and type \START.EXE (for example: D:\START.EXE).
Select the language you want.
The main menu screen appears.
Click the Initial Setup icon. You can view the Initial Setup instructions.
For Macintosh users
(1) Turn on the Macintosh. Insert the CD-ROM into the CD-ROM drive.
(2) Click the Initial Setup & Maintenance Tutorial icon.
Select the language you want.
Click the Initial Setup icon. You can view the Initial Setup instructions.