Brother HL-1870N - For Macintosh Users

CHAPTER 2 INSTALLATION AND BASIC OPERATION
2-10
5. For Brother Peer-to-Peer network printer users (NetBIOS)
Configuring the NetBIOS port
(1) Select NetBIOS, and click the Next button.
(2) Enter a unique port name (ex. BNT1), and then click the OK button.
(3) Enter the path name (or click the Browse button to see a list of printers), and then click the
OK button.
(4) Click the Finish button and restart your PC. After the PC has restarted, setup is complete.
3.3 For Macintosh Users
For USB interface cable users
Connect the printer to the Macintosh and install the BR-Script PPD File
(1) Click Connect the interface cable & Install the driver/utility.
(2) Make sure the printer power switch is ON.
(3) Connect the USB interface cable to the Macintosh
®
, and then connect it to the printer.
(4) Follow the instructions on the screen.
(5) Open the Macintosh HD icon.
(6) For Mac
®
OS 8.6 to 9.04 Users; Open the Apple Extras folder.
Open the Apple LaserWriter Software folder.
For Mac
®
OS 9.1 to 9.2 Users; Open the Applications.( Mac
®
OS 9) folder.
Open the Utilities folder.
(7) Open the Desktop Printer Utility icon.
(8) Select Printer (USB), and then click the OK button.
(9) Click the Changebutton in PostScript Printer Description (PPD) file. Select Brother HL-
1850/1870N series, and then click the Select button.
(10) Click the Changebutton in USB Printer Selection. Select HL-1850/1870N series, and
then click the OK button.
(11) Click the Createbutton.
(12) Enter your printer name (HL-1850/1870N series), and then click the Save button.
(13) Select Quit from the File menu.