Brother HL-1870N - Install the Drum Unit Assembly; Load Paper into the Paper Cassette

CHAPTER 2 INSTALLATION AND BASIC OPERATION
2-4
3.1.1 Install the drum unit assembly
(1) Press the cover release button, and then open the front cover.
Unpack the drum unit assembly. Rock it from side to side 5 or 6 times to distribute the toner evenly
inside the assembly.
Fig. 2-2
Install the drum unit assembly into the printer.
Fig. 2-3
Close the front cover.
3.1.2 Load paper into the paper cassette
(1) Pull the paper cassette completely out of the printer.
While pressing the paper guide release lever, slide the adjusters to fit the paper size. Check that they
locate correctly into the slots.
Fig. 2-4
NOTE:
For Legal or 8.5 x 13 in. paper, press the universal guide release lever to extend the rear of the
Paper cassette.
Universal guide
release lever
Paper guide release lever