Brother HL-1870N - Rear Cover

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-21
3.7 Rear Cover
(1) Open the rear cover.
(2) Release the hooks on the right and left sides of the DX rear chute to release the DX outer
chute ASSY from the rear cover.
Fig. 4-34
(3) Remove the DX outer chute ASSY from the printer by releasing the hooks at the right and
left sides of the printer.
Fig. 4-35
(hook)
Printer
DX outer chute ASSY
Rear cover R
DX rear chute
Rear cover
Rear cover L
(hook)
Printer
DX outer chute ASSY
2
1
2
1