CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-17
3.6 DX Feed ASSY
(1) Close the rear cover and remove the DX feed ASSY from the printer.
Fig. 4-26
(2) Remove the bind M3x4 screw to remove the ground wire cover and the ground wire from
the paper guide upper ASSY, and then remove the ground wire from the ground wire
cover.
(3) Remove the bind B M3x7.5 Taptite shoulder screw, the washer and the bind B M3x8
Taptite screw to remove the paper guide upper ASSY from the DX feed ASSY.
Fig. 4-27
DX feed ASSY
Bind M3x4
Taptite,bind B M3x8
Ground wire cover
Ground wire
Shoulder Taptite,
bind B M3x7.5A
Paper guide upper ASSY
DX feed ASSY
Rear cover
To Next Page
Loading...
