HL-1850/1870N SERVICE MANUAL
2-33
5.5.5 Print menu
Setting Menu Description
MEDIA TYPE
=PLAIN PAPER / TRANSPARENCIES / THIN PAPER / THICK
PAPER / THICKER PAPER / BOND PAPER / ENVELOPES /
ENV.THICK / ENV.THIN
PAPER
Set cup sheet paper size to Letter, Legal, A4, A5, A6, B5, B6,
Executive, COM10, Monarch, C5 and DL
COPIES
=1 to 999
Shows the number of printed pages.
ORIENTATION
=PORTRAIT / LANDSCAPE
This printer can print pages in portrait or landscape orientation.
This printer can be adjusted to correct the page format.
Sub-setting Menu Description
X OFFSET=0
Move the print start position (at the
upper left corner of pages) horizontally
up to 500 (left) to +500 (right) dots in
300 dpi units.
PRINT POSITION
Y OFFSET=0
Move the print start position (at the
upper left corner of pages) vertically up
to 500 (up) to +500 (down) dots in 300
dpi units.
AUTO FF=OFF
=OFF / 1:5:99 (sec)
Allows you to print the remaining data without pressing the Go
switch.
FF SURPRESS
=OFF / ON
Turn on / off the form feed suppress function.
FONT NO.
=I0000:?????
FONT
PITCH/POINT
=???.??
SYMBOL/
CHARACTER SET
PC-8 /
Set the symbol set or the character set.
TABLE PRINT
Print code table
AUTO LF=OFF
=OFF / ON
ON: CRÆCR+LF,
OFF: CRÆCR
AUTO CR=OFF
=OFF / ON
ON: LFÆLF+CR, FF+CR,
OR VTÆVT+CR
OFF: OFÆOF, FFÆFF, OR VTÆVT
HP LASERJET
AUTO WRAP=OFF
=OFF / ON
Line feed and carriage return occur
when the printer reaches the right
margin.
PR2001022