Brother HL-1870N - Network; Interface

HL-1850/1870N SERVICE MANUAL
2-37
5.5.6 Network
Setting Menu Description
Sub-setting Menu Description
TCP/IP ENABLE
=ON / OFF
IP ADDRESS=
###, ###, ###, ###
SUBNET MASK=
###, ###, ###, ###
GATEWAY=
###, ###, ###, ###
IP BOOT TRIES
=#
TCP/IP
IP METHOD
=AUTO / STATIC / RARP / BOOTP /
DHCP
NETWARE ENABLE
=ON / OFF
NETWARE
NET FRAME
=AUTO / 8023 / ENET / 8022 / SNAP
APPLETALK
=ON / OFF
NETBEUI
=ON / OFF
DLC/LLC
=ON / OFF
BANYAN
=ON / OFF
LAT
=ON / OFF
NETBIOS/IP
=ON / OFF
ENET
=ATUO / 100B-FD / 100B-HD / 10B-FD / 10B-HD
5.5.7 Interface
Setting Menu Description
AUTO IF TIME
= 1:5:99 (SEC)
You must set the timeout period for the auto interface
selsection.
INPUT BUFFER
= Level 1:5:15
Increase or decrease the
input buffer capacity.
RESTART PRINTER?
When using the parallel interface
Sub-setting Menu Description
HIGH SPEED
=ON / OFF
Turns the high speed parallel
communications ON / OFF.
PARALLEL
BI-DIR=ON/OFF
=ON / OFF
Turns the bi-directional parallel
communications ON / OFF.
PR2001022