Brother HL-1870N - Feed MP Unit

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-44
3.14 Feed MP Unit
(1) Turn the main frame the right way up.
(2) Open the MP roller cover.
(2) Remove the bearing R from the MP chute ASSY.
(3) Shift the paper pick-up roller ASSY with two roller collars to the left (the bearing R side) to
release from the MP paper pick-up roller shaft.
(4) Remove the paper pick-up roller ASSY and the roller collars from the MP chute ASSY.
(5) Remove the bearing L from the MP chute ASSY.
Fig. 4-70
Bearing R
Bearing L
MP roller cover
Bearing R
Bearing L
Paper pick-up roller
Roller collar
Paper pick-up
roller ASSY
Roller collar
3
1
2
MP chute ASSY