Brother HL-1870N - Page 152

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-45
(6) Remove the separation plate ASSY.
(7) Remove the two MP pressure spring 25.
(8) Remove the two bind B tite 3x10 screws from the MP chute cover.
(9) Release the two bosses at the both ends of the MP pressure plate ASSY using a flat
screwdriver, and then remove it from the main frame.
Fig. 4-71
Separation plate ASSY
MP pressure spring 25
MP pressure spring 25
Screw, bind B tite 3x10
Screw, bind B tite 3x10
(boss)
MP pressure plate ASSY
(boss)
MP chute cover