HL-1850/1870N SERVICE MANUAL
2-11
For network users
Connect the printer to the Macintosh & install the BR-Script PPD file
(1) Double click the BR-Script PPD Installer icon and then follow the instructions on the
screen.
(2) Turn the printer power switch off.
(3) Connect the cable to the printer, and then connect it to a free port on the hub.
(4) Turn the printer power switch on.
(5) Open the Chooser from the Apple Menu on the Macintosh.
(6) Click the LaserWriter8 * icon (If you need to change the network zone, select which zone
you want to use from the AppleTalk
®
zones list).
NOTE:
In the Chooser the name BRN_xxxxxx_P1_AT is appeared, where xxxxxx is the last six
digits of the Ethernet address. See Chapter 7 of the Network Users Guide for more
information.
(7) Click on the appropriate printer server and close the Chooser. The setup is now complete.
*
If the Apple
LaserWriter8 driver is not already installed on your system, you can download it
from http://www.apple.com.
To Next Page
Loading...
