Brother HL-1870N - Page 38

HL-1850/1870N SERVICE MANUAL
2-9
4. For Brother Peer-to-Peer network printer users (LPR-recommended Peer-to-Peer
printing method)
Configuring the LPR port
<For Windows
®
95/98/Me users>
(1) Select LPR (Recommended) and then click the Next button.
(2) Enter a unique port name (ex. BLP1), and then click the OK button.
(3) Specify the printers IP address (or click the Browse button to see a list of printers), and
click the OK button.
Fig. 2-10
(4) Click the Finish button and restart the PC. After the PC has restarted, setup is complete.
<For Windows NT
®
4.0/ Windows
®
2000/XP users>
(1) Select LPR (Recommended), and then click the Next button.
NOTE:
If the following screen appears, insert the Windows NT
®
4.0 CD-ROM into the CD-ROM drive.
Fig. 2-11
(2) Click the Next button.
(3) Enter the printers IP address and the port name BINARY_P1, then click the Next button.
(4) Click the Finish button and restart the PC. After your PC has restarted, setup is complete.