CHAPTER 2 INSTALLATION AND BASIC OPERATION
2-8
Driver Deployment Wizard: Useful utility for peer-to-peer users
Use the Brother Driver Deployment Wizard software to automate the installation of Brother
networked printers in a TCP/IP environment. The Wizard can create an Executable file that
can be sent to other network users, when run, the Executable file installs the appropriate
printer driver and network printing software.
To access the Driver Deployment Wizard:
(1) Insert the CD-ROM supplied with the printer.
(2) Click the Install Software icon and select the Driver Deployment Wizard.
2. Installing the driver
(1) Click the Connect the interface cable and install the printer driver / utilities.
Select the Network interface.
Turn the printer power switch off.
Connect the cable to your printer, and then connect it to a free port on your hub.
Turn the printer power switch on.
Click the Next button.
Select the Network shared printer or the Brother peer-to-peer network printer, and then click the
Next button.
Select the network connection style and follow the instructions below:
3. For Network shared printer users
Select the appropriate printer Queue or Sharename
(1) Select the current printers queue, and then click the OK button.
Fig. 2-9
(2) Once the appropriate queue is specified, the printer driver will be installed.
(3) The setup is now completed.
To Next Page
Loading...
