Brother HL-1870N - Page 121

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-14
(6) Turn the top cover upside down and remove the three cup B M3x8 Taptite screws from the
top cover.
(7) Turn the top cover the correct way up to remove the panel cover ASSY from the top cover.
Fig. 4-20
(8) Disconnect the connector and the harness connected with the panel PCB ASSY.
(9) Remove the three cup B M3x10 Taptite screws to remove the panel PCB ASSY from the
panel cover ASSY.
Fig. 4-21
Taptite,cup B M3x8
Top cover (Back side)
Panel cover ASSY
Taptite,cup B M3x10
Taptite,cup B M3x10
Panel PCB ASSY
LCD holder
Panel cover ASSY