Brother HL-1870N - Page 24

HL-1850/1870N SERVICE MANUAL
1-9
Moisture content
4% to 6% by weight
<Multi-purpose tray>
Cut sheet Envelope
Basis weight
60 to 161 g/m
2
(16 to 43 lb.) 75 to 90 g/m
2
(20 to 24 lb.)
single thickness
Caliper
0.08 to 0.2 mm (0.003 to 0.008 in.) 0.084 to 0.14 mm (0.003 to 0.005 in.)
single thickness
Moisture
content
4% to 6% by weight 4% to 6% by weight
(4) Recommended paper
Europe USA
Plain paper
Xerox Premier 80 g/m
2
Xerox Business 80 g/m
2
IGEPA X-Press 80 g/m
2
Xerox 4200DP 20 lb
Champion Paper One 20 lb
Hammermill Laser Paper 24 lb
Recycled paper
Steinbis Recycling Copy 80 g/m
2
Transparency
3M CG3300 3M CG 3300
Label
Avery laser label L7163 Avery laser label #5160
!
CAUTION:
When you are choosing print media, be sure to follow the information given below to prevent
any paper jams, print quality problems or printer damage;
• It is recommended to use long-grained paper for the best print quality. If short-grained
paper is being used, it might be the cause of paper jams.
• Use neutral paper. Do not use acid paper to avoid any damage to the drum unit.
• Avoid using coated paper such as vinyl coated paper.
• Avoid using preprinted or highly textured paper.
• It is recommended to use labels or transparencies which are designed for use in laser
printers.
• Avoid feeding labels with the carrier sheet exposed, or the printer will be damaged.
• Before loading paper with holes such as organizer sheets, be sure to fan the stack well.
• Do not use organizer sheets that are stuck together. The glue that is used might caused
damaged to the printer.
• When printing on the back of pre-printed paper, if the paper is curled, be sure to straighten
the paper as much as possible.
• Different types of paper should not be loaded at the same time in the paper cassette to
avoid any paper jams or misfeeds.