HL-1850/1870N SERVICE MANUAL
7-3
2.2 Function Table
The following printer settings and function will be available with this operation.
Title & Subtitle Item to be Set Description
TRAY SETTING
(MANUAL FEED)
PAPER IN=CONT*
Feeds paper automatically when
printing using the manual feed
function.
PAPER IN=STOP
Feeds paper by pressing the Go
switch when printing using the
manual feed function.
TRAY COMMAND MODE TRAY COM.=NORM*
HP LaserJet 4 compatible.
TRAY COM.=SPEC.
HP LaserJet 3 compatible.
READOUT SELECT READOUT=OFF*
When receiving DC3 in FX
emulation, ignores the data
received before DC1.
READOUT=ON
Not ignore the data even DC3 is
received.
FONT SELECT
SCALABLE FONT FONT=ALL*
Enables all scalable fonts when
selecting PCL font setting.
FONT=LJ4
Disables the fonts below when
selecting PCL font setting.
Atlanta, Bermuda Script, PC
Brussels, Copenhagen,
Germany, Portugal, Calgary,
San Diego, US Roman
FONT SELECT PRIMARY FONT
Selects primary fonts in
LaserJet emulation.
SECONDARY FONT
Selects secondary fonts in
LaserJet emulation.
IBM CHR SET MODE IBM E1H=Esszet
Places Esszet on E1h of IBM
character set.
IBM E1H=Beta
Places Beta on E1h of IBM
character set.
W BOLD ON/OFF W BOLD=OFF*
W BOLD=ON
ON: Makes a reprinted
character bold. (Print speed
would get slow.)
DLFNT Bd/It DLFNT Bd/It=NO*
DLFNT Bd/It=YES
YES: Creates bold and italic
font from download fonts.
B PROD ON/OFF B PROD=OFF*
B PROD=ON
ON: Creates bold and italic font
from bitmap fonts.
CONDENCE SELECT CONDENC=16.66p*
CONDENC=17.14p
Selects the pitch for EPSON /
IBM condensed characters.
OEM FONT SELECT OEMFONT=DISABLE*
OEMFONT=ENABLE
Enables and disables to select
European Parliament fonts.
To Next Page
Loading...
