Brother HL-4000CN - Description of Procedures

IV-5
1.5 Description of Procedures
Note:
In the procedures, directions are represented as follows.
• Front: Front when you are facing the front of this laser printer.
• Rear: Inner direction when you are facing the front of this laser printer.
• Left: Left hand when you are facing the front of this laser printer.
• Right: Right hand when you are facing the front of this laser printer.
Fig.4-5
Note:
The screws in the illustrations should be removed using a cross head screwdriver unless
otherwise specified.
Note:
A black arrow in the illustrations indicate movement in the direction of the arrow.
Numbered black arrows indicate the order of the movement.
Note:
For the positions of the connectors (P/J), refer to Chapter 7, Plug/Jack(P/J) Connector
Locations.
Note:
Assembly is the harness of disassembly unless otherwise stated.
Rear
Left
Ri
g
ht
Front