Brother HL-4000CN - IOT Function Outline

I-3
4.2 IOT Function Outline
Configuration Contents
Recording section
Recording System
Developer
Toner
Exposure System
Fusing System
- Color 16PPM, Monochrome 16PPM
- 600dpi (standard speed), 1200dpi (half speed)
- OPC drum, 4-tandem cartridges , electro-photographic system
using intermediate transfer rolls
- 2-component
- Chemical toner (black, yellow, magenta, cyan)
- Semiconductor laser, simultaneous scanning by 4 beams
- Heat fusing of the free belt nip system
CRU
(consumables)
- Black toner cartridge
- Yellow toner cartridge
- Magenta toner cartridge
- Cyan toner cartridge
- Drum cartridge
- Transfer roll cartridge
Paper Source - Internal 500 sheets feeder unit
- MSI unit (100 sheets)
- 500 sheets x 2 feeder unit (optional)
Paper Exit - Face down output tray (250 sheets)
Duplex - Internal Duplex
Control Panel - LCD: 16 digits x two rows
- Button: 8
- LED: 5
- MIMIC: supported
LVPS - 100/120/220 VAC, 50/60Hz power source