I-2
4. PRINTER SYSTEM CONFIGURATION
4.1 Outline of the Printer
1) Host computer
The target host is a personal computer (PC98, IBM PC-AT compatible, or Macintosh)
connected directly and also through a network.
2) ESS
The ESS interprets print information (control code data, character code data,
graphics data, and image data) sent from the host computer into video data and
sends it to the IOT.
3) IOT
The ESS prints received video data for viewing. This unit uses the A4-size 600/1200
dpi laser xerography system.
Host
Computer
ESS
Control Panel
IOT
Network
IEEE1284 or USB1.1
Power Source
AC
To Next Page
Loading...
