I-14
9. IMAGE ADDITION FUNCTION
9.1 Watermark
A user-specified or routine character string can be printed as a watermark.
10. PAGE LAYOUT FUNCTIONS
10.1 Reverse Print
The generation of a 180-degree rotated image can be selected. This function is used if a
desired result cannot be obtained without rotating a generated image because the
direction of transport is determined (ex. envelope).
10.2 Zoom
This printer supports routing printing or printing of a size enlarged or reduced from a
routine one. The magnification can be set arbitrarily in a range from 25 to 400%.
10.3 Multiple Page
The user can specify 2up, 4up, 8up, 16up, or 32up to print a specified number of pages
together.
10.4 Margin Shift
The user can specify the top, bottom, right, and left margins in millimeters.
10.5 Poster
A single-page image of up to 6 x 6 in size can be printed 36 times repeatedly on a single
page.
10.6 Booklet Printing
A job consisting of several pages can be printed and stapled at the center of paper to
form a booklet.
11. PAGE OUTPUT SEQUENCE CONTROL FUNCTIONS
11.1 Stacking
Theoretically this function can print up to 999 copies.
11.2 Collating
Theoretically this function can print up to 999 copies.
When a HDD is mounted, highs-peed collating is possible. Although varying with the
data compression rate, the number of pages in a copy never exceeds 1,000.
To Next Page
Loading...
