Brother HL-4000CN - Fuser Drive ASSY; Latch L

IV-31
2.2.22 Latch L
1) Release the hook securing the latch L to the left side of the front ASSY in.
2) Remove the latch L from the front ASSY in.
Fig.4-48
2.2.23 Fuser drive ASSY
1) Remove the screw securing the earth of the harness ASSY FSR to the fuser drive
ASSY.
2) Release the harnesses from the harness guides.
3) Remove 3 screws securing the fuser drive ASSY to the front ASSY in.
4) Remove the fuser drive ASSY from the front ASSY in.
Fig.4-49
Front ASSY in
Latch L
Front ASSY in
Screw, M3x8
Fuser drive ASSY
Screw, M3x8
Screw,
M3x6
Screw, M3x8