I-13
2) All display
Mode Resolution Use and processing
For
transparency
600dpi
This mode is suitable for printing OHP transparencies.
The screen and color conversion for a small number of
lines reduce IOT defects and make this mode suitable for
printing on transparencies.
ICM
readjusted
(Colorsync for
Macintosh)
600dpi This mode is suitable for color matching with the display
using ICM.
Toner save 600dpi The toner save function is used in this mode.
The hue generally goes down but the toner consumption
is reduced.
Presentation 600dpi This mode is suitable for printing presentation materials
by clear color reproduction. In this coherency mode, the
output hue is the same as those of other models.
Standard
(High gloss)
600dpi Glossy prints are output in this standard mode.
(Plain paper 1/Plain paper 2)
High quality
(High gloss)
600dpi Glossy prints are output in this high quality mode.
(Plain paper 1/Plain paper 2)
Engine resolution/Speed
600dpi 1200dpi
Paper type Image quality mode Simplex Duplex Simplex Duplex
Standard (High gloss)/
High quality (High gloss)
Half
speed
Half
speed
High definition Half
speed
Half
speed
Plain paper 1/
Plain paper 2
Other modes
(Standard, High quality, etc)
Full
speed
Full
speed
High definition Half
speed
Other paper
Other modes
(Standard, High quality, etc)
Half
speed
8.9 Profile Specification
The user can select "Color Temperature/Gamma Specification," "ICC Profile
Specification," or "No Specification" as a color conversion profile.
To Next Page
Loading...
