Brother HL-4000CN - PKG Service MCU HANABI

IV-57
2.4.11 PKG service MCU HANABI
1) Remove 4 screws securing the cover MCU to the box ASSY MCU/ESS.
2) Remove the cover MCU from the box ASSY MCU/ESS.
3) Remove the connectors on the PKG service MCU HANABI from the box ASSY
MCU/ESS.
Fig.4-95
4) Remove 6 screws securing the PKG service MCU HANABI to the box ASSY
MCU/ESS.
5) Remove the PKG service MCU HANABI from the box ASSY MCU/ESS.
Fig.4-96
Cover MCU
PKG service MCU HANABI
Screw, M3x6
Screw, M3x6
Screw, M3x6
Screw, M3x6
Screw, M3x6