Brother HL-4000CN - 4.11.2 Parameter List Print

V-54
4.11.2 Parameter list print
Function: Outputting a list of setting and displaying parameters held by IOT in NVM
Operation procedure:
1. Enter the Diag. (C/E) mode.
2. Select [CE Maintenance Parameter] with the
and buttons.
3. Press the Form Feed/Set button to advance to setting/display parameter selection in
[CE Maintenance Parameter].
4. Select [Parameter Print] with the
and buttons.
5. Press the Form Feed/Set button to determine the selection.
6. Press the Form Feed/Set button again to print the parameters.
HL-4000CN MCU Parameter List Serial No. 00000
Registration Adjust Slow Scan Paper from Black : 0
Registration Adjust Slow Scan, 600dpi, Magenta from Black
: 6
Yellow from Black : 4
Cyan from Black : 1
Registration Adjust Slow Scan, 1200dpi, Magenta from Black
: 11
Yellow from Black : 9
Cyan from Black : 1
Registration Adjust Fast Scan, Magenta from Black
: 1
Yellow from Black : 3
Cyan from Black : 3
Life Counters Yellow Toner Dispense Time : 645
Magenta Toner Dispense Time : 700
Cyan Toner Dispense Time : 802
Black Toner Dispense Time : 648
TRANSFER ROLL CARTRIDGE1 Sheets :
373
TRANSFER ROLL CARTRIDGE2 Dispense Time
: 3041
Printer Sheets : 373
Printer Head Sheets : 369
Printer Head Time : 8183
Printer Head Yellow Dispense : 645
Printer Head Magenta Dispense : 782