Brother HL-4000CN - 16 Host Interface; Client Hardware; Client os; Server os

I-17
16. HOST INTERFACE
16.1 Client Hardware
Hardware Conditions of guarantee
PC-AT compatible
(DOS/V)
A model where Windows 95/98/ME, 2000/XP, or NT4.0 is
guaranteed to run
PC98 Series A model sold in November 1993 or later with a two-way parallel
interface where Windows 95/98/ME, 2000/XP, or NT4.0 is
guaranteed to run
Macintosh A model where MAC OS 8.1 to 9.1,OSX 10.1 is guaranteed to run
16.2 Client OS
Client OS Driver Direct print
utility
Network utility SNN
Windows
95/98/98ME
Supported Supported Supported Supported
Windows NT4.0 Supported Supported Supported
Windows 2000/XP Supported Supported Supported
MAC OS 8.1 to 9.1 Supported
16.3 Server OS
• Windows NT 4.0 Server
• Windows 2000 Server
• NetWare 3.12J/3.2J/4.1J/4.11J/4.2J/5J
• Windows 95/98/ME (Printer shared)
17. IEEE1284
17.1 Connector
Amphenol 36-pin
17.2 IEEE1284 Support
The printer supports IEEE1284 (compatible, nibble, ECP mode). If the host computer
does not support IEEE1284, the two-way function cannot be used.
18. ETHERNET
The printer can be connected to either 100BASE-TX or 10BASE-T by automatic or
manual switching. The physical specifications conform to the IEEE802.3 standards.
18.1 Connector
RJ-45