Brother HL-4000CN - Actuator no Paper; Sensor Photo: no Paper

IV-63
2.5.6 Actuator no paper
1) Release the hook securing the actuator no paper to the pickup ASSY and extract the
left side shaft of the actuator no paper.
2) Pull out the actuator no paper left and upward from the pickup ASSY.
Fig.4-104
2.5.7 Sensor photo: No paper
1) Release the hooks at 3 positions securing the sensor photo: no paper to the pickup
ASSY.
2) Remove the connector on the sensor photo: no paper.
3) Remove the sensor photo: no paper from the pickup ASSY.
Fig.4-105
Actuator no paper
Rear
Top
Front
Rear
Top
Front
Sensor photo: no paper