Brother HL-4000CN - 6 System Characteristics; Operation Modes

I-6
6. SYSTEM CHARACTERISTICS
6.1 Operation Modes
The printer has the following modes:
1) Running Mode: The printer is running and recording.
• Fusing system
Held at the operating temperature
• Exposure system
Rotating at the running speed
• Recording system
Operating
• Fuser fan
Rotating at high speed
• Rear fan
Rotating at high speed
• LVPS
Normal mode
2) Ready Mode: The printer is ready to print.
• Fusing system
Held at the standby temperature
• Exposure system
Paused
• Recording system
Paused
• Fuser fan
Rotating at half speed
• Rear fan
Rotating at half speed
• LVPS
Normal mode
3) Low Power Mode (Light Sleep Mode):
If no print data is received for a specified time, the printer changes to this mode to
save power.
• Fusing system
Paused
• Exposure system
Paused
• Recording system
Paused
• Fuser fan
Paused
• Rear fan
Paused
• LVPS
Normal mode
4) Power Save Mode (Deep Sleep Mode):
If no print data is received for a specified time in Low Power Mode, the printer
changes to this mode to save more power. As to the power supply to IOT, the VPS
output is totally blocked and only the power to the ESS network function section is
supplied.
• Fusing system
Paused
• Exposure system
Paused
• Recording system
Paused
• Fuser fan
Paused
• Rear fan
Paused
• LVPS
Power save mode