V-2
<Terms of glossary>
Fail code: Control panel displays this code in case of a trouble.
Power off: Main power switch is off and power cord is disconnected from the outlet.
WARNING
If power off is specified in the work procedure, turn the Main power switch to off and
unplug power cord from the outlet. Otherwise, your may receive an electric shock or get
injured.
Power on: Main power switch is on.
Power on/off: Turn the main power switch off and on again immediately.
Execute [DO-10]: Enter diagnostic code DO-10.
Exit [DO-10]: Exit diagnostic code DO-10.
+5VDC
H level: +4.1 to +5.6VDC
L level: -0.3 to +1.2VDC
+24VDC
H level: +21.8 to +25.8VDC
L level: -0.4 to +3.3VDC
To Next Page
Loading...
