2-104
Confidential
■ Faint print
<User Check>
- Open and close the front cover and make print again.
- Check that the printer is installed on a level surface.
- Check if the orange protection material is removed
from the drum unit.
- Wipe the scanner windows of the laser unit with a soft,
lint-free cloth. (Refer to Fig. 2-12 (P2-95))
- Replace the toner cartridge with a new one.
- Replace the drum unit with a new one.
Step Cause Remedy
1 Laser unit failure Replace the laser unit.
2 Toner/New sensor PCB
failure
Replace the Toner/New sensor PCB ASSY.
To Next Page
Loading...
