Brother HL-4150CDN - Registration Mark Sensor Holder Assy;Shutter Solenoid

3-102
Confidential
9.43 Registration Mark Sensor Holder ASSY/
Shutter Solenoid
(1) Disconnect the Connector (CN8) from the High-voltage power supply PCB ASSY.
Fig. 3-131
(2) Remove the Core from the Harness of the Registration mark R PCB and Belt temperature
sensor.
Fig. 3-132
High-voltage power supply PCB ASSY
CN8
Registration mark
sensor holder ASSY
Connector
Core
Registration mark R PCB
Belt temperature sensor
High-voltage power supply PCB ASSY
<Left side>