Brother HL-4150CDN - Fuser Fan

3-84
Confidential
9.33 Fuser Fan
(1) Disconnect the Connector (CN4) from the High-voltage power supply PCB ASSY.
Fig. 3-103
(2) Pull out the Fuser fan from the Paper eject ASSY by slightly rotating it in the arrow
direction in the figure below.
Fig. 3-104
CN4
High-voltage power supply PCB ASSY
Fuser fan
Connector
<Right side>
Paper eject ASSY
Label
Fuser fan
<Right side>
2b
2a