Brother HL-4150CDN - Main PCB ASSY

3-58
Confidential
9.18 Main PCB ASSY
(1) Disconnect the eight Connectors (CN1, CN2, CN16, CN17, CN18, CN19, CN20, and
CN21) and two Flat cables (CN5 and CN14).
Fig. 3-62
Note:
- After disconnecting flat cable(s), check that each cable is not damaged at its end or
shortcircuited.
- When connecting flat cable(s), do not insert them at an angle. After insertion, check
that the cable are not at an angle.
CN6
CN5
CN10
CN11
CN14
CN13
CN23
CN22
CN21
CN20
CN19
CN18
CN17CN16
CN15
CN8
CN1 CN2
Main PCB ASSY