Brother HL-4150CDN - Page 210

3-62
Confidential
(5) Remove the two Taptite cup S M3x6 SR screws to remove the Top beam from the Base
frame unit.
Fig. 3-68
(6) Remove the five Taptite cup S M3x6 SR screws to remove the four Scanner holders.
Fig. 3-69
Base frame unit
Top beam
Taptite cup S M3x6 SR
<Front>
Taptite cup S M3x6 SR
Scanner holder
Taptite cup S M3x6 SR
Taptite cup S M3x6 SR
Taptite cup S M3x6 SR
Taptite cup S
Scanner holder
Scanner holder
Scanner holder
M3x6 SR
Base frame unit
Scanner holder
Laser unit
<Front>