5-26
Confidential
(4) When “SELECT: TRAY1” is displayed on the LCD, press the or button to select the
print format, and press the OK button.
The available print formats are shown below.
(5) The “PAPER FEED TEST” appears on the LCD, and print of the continuous print pattern
with the selected pick-up test items starts.
(6) Press the Cancel button to return to the printer to the initial state of the maintenance
mode.
LCD
SELECT: TRAY1
SELECT: TRAY2
SELECT: MP
SELECT: TRAY1 DX
SELECT: TRAY2 DX
SELECT: MP DX
Note:
- The test printing is stopped until there is no paper in a tray. Press the Cancel button to
stop if you check the paper feeding and ejecting operations. (Printing is resumed when
paper is loaded in the tray.)
-
In the case that the error occurs during test printing, the test printing is stopped. (If you do
not press the Cancel button, printing is resumed when the error is cleared.)
- To clear the error, remove the error factors, and then press the
Go
button.
To Next Page
Loading...
