Brother HL-4150CDN - Page 409

7-19
Confidential
(17) Remove the Taptite cup S M3x6 SR screw from the front of the Top cover ASSY.
Fig. 7-32
(18) Remove the two Taptite bind B M4x12 screws from the back of the Top cover ASSY.
Fig. 7-33
Top cover ASSY
Taptite cup S M3x6 SR
<Front>
Top cover ASSY
Taptite bind B M4x12
Taptite bind B M4x12
<Back side>