2-26
Confidential
■ Error code 1F
More than the specified number of the option trays is installed.
This error does not usually occur in the normal use. The conceivable causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
<User Check>
- Turn OFF the power switch, and turn it ON again after a while.
■ Error code 20 (K)
Error code 21 (Y)
Error code 22 (M)
Error code 23 (C)
Laser diode error.
This error does not usually occur in the normal use. The conceivable causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
<User Check>
- Turn OFF the power switch, and turn it ON again after a while.
-
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Print Unable 20
Turn the power off and then back on again.
Print Unable 21
Turn the power off and then back on again.
Print Unable 22
Turn the power off and then back on again.
Print Unable 23
Turn the power off and then back on again.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
