Brother HL-4570CDW - Page 198

3-50
Confidential
(3) Remove the Taptite cup S M3x6 SR screw from the front of the Top cover ASSY.
Fig. 3-48
(4) Remove the two Taptite bind B M4x12 screws from the back of the Top cover ASSY.
Fig. 3-49
Top cover ASSY
Taptite cup S M3x6 SR
<Front>
Top cover ASSY
Taptite bind B M4x12
Taptite bind B M4x12
<Back side>