Brother HL-4570CDW - Toner;New Sensor PCB ASSY

3-82
Confidential
9.31 Toner/New Sensor PCB ASSY
(1) Release the two Hooks to remove the TE sensor protect film from the Toner reset holder.
Fig. 3-99
(2) Release the six Hooks to remove the Toner/New sensor PCB ASSY from the Toner reset
holder.
Fig. 3-100
Harness routing: Refer to “ Toner/New Sensor PCB ASSY”
Hook
Toner reset holder
TE sensor protect film
<Left side>
Toner reset holder
Hook
<Left side>
Hook
Pin
Pin
Toner/New sensor PCB ASSY