3-100
Confidential
9.42 Cleaner Pinch Roller Holder
(1) Remove the two Pins and release the one Hook to remove the Front chute flapper and
two Flapper springs from the Low-voltage power supply unit.
Fig. 3-126
(2) Press the stopper, and then slide the Cleaner pinch roller to remove it from the
Low-voltage power supply unit.
Fig. 3-127
Pin
Flapper spring
Front chute flapper
Low-voltage power supply unit
Hook
Pin
Flapper spring
Cleaner pinch roller holder
stopper
Low-voltage power supply unit
2a
2c
2b
To Next Page
Loading...
