5-47
Confidential
*4
01 to 10 are entered in ## in chronological order. When you press the OK button as the
printer error history is displayed, the page counter values when the errors occurred are
displayed.
*5
01 to 10 are entered in ## in chronological order. When you press the OK button as the
engine error history is displayed, TM: elapsed time (minute) from the previous error and BT:
the number of times when the power is ON are displayed. When you press the OK button
again, the engine error history is displayed again.
*6
01 to 10 are entered in ## in chronological order. In the log for design analysis, even if a
same error occurs continuously, it is recorded in the history every time it occurs.
<Operating procedure>
(1) Press the or button to display “MAINTENANCE 80” on the LCD in the initial state of
the maintenance mode. Then, press the OK button. The printer displays “USB:” on the
LCD.
(2) Each time the Go button is pressed, next log information item appears on the LCD in the
order. If pressing the Back button, the previous log information appears.
(3) Press the Cancel button to return to the printer to the initial state of the maintenance
mode.
1.4.24 Error code indication (Function code 82)
<Function>
This function displays an error code of the printer on the LCD.
<Operating procedure>
(1) Press the or button to display “MAINTENANCE 82” on the LCD in the initial state of
the maintenance mode. Then, press the OK button. The printer displays “printer ERROR
X X” on the LCD.
(2) Press the Cancel button to return to the printer to the initial state of the maintenance
mode.
LCD Description
Error log
related
items
MACHINEERR_##: *
4
Error history ## to be displayed to the user: Error
code/Occurrence page counter
ENGERR##:
******
*
5
Engine error history ##:
******
Error level (2 bytes),
large classification code (2 bytes), detailed
classification code (2 bytes)
DEVSTATUS__##: *
6
Log for design analysis / Occurrence page counter
Note:
The error data items stored in the error history are different from those in the second
page of Printer Settings.
Note:
If you press the OK button while an error code of “MACHINEERR” or “DEVATATUS” is
displayed on the LCD, you can check the page counter value at the time when this error
occurred. Press the OK button again to return to the error log display.
To Next Page
Loading...
