Brother HL-4570CDW - T2 Cover Rear

3-133
Confidential
10.3 T2 Cover Rear
(1) Remove the two Taptite cup S M3x10 SR screws from the T2 cover rear.
Fig. 3-182
(2) Remove the two Pins to remove the T2 cover rear from the Main body.
Fig. 3-183
T2 cover rear
Taptite cup S M3x10 SR
Taptite cup S M3x10 SR
Pin
Pin
T2 cover rear
2a
2b
Main body