Brother HL-4570CDW - Page 251

3-103
Confidential
(3) Remove the two Taptite bind B M3x10 screws to remove the Registration mark sensor
holder ASSY from the Base frame unit.
Fig. 3-131
(4) Remove the Taptite bind B M3x10 screw to remove the Shutter solenoid from the
Registration mark sensor holder ASSY.
Fig. 3-132
Taptite bind B M3x10
Base frame unit
Registration mark sensor holder ASSY
<Back side>
Taptite bind B M3x10
Registration mark sensor holder ASSY
Shutter solenoid
Pin