5-62
Confidential
2.5 Deletion of User Setting Information, etc.
In this printer, the user setting information is stored in the EEPROM and flash memory of the
main PCB. You can delete all the data listed below at a time with the procedure given below.
- Information related to Net
- User setting information
- Computer usage limit information (HL-4570CDW/4570CDWT only)
<Operating procedure>
(1) Disconnect the network cable from the printer.
(2) Press the or button in the ready state until “Reset
Menu” appears on the LCD.
(3) Press the OK button. The “Reset Menu/Network” will
appear on the LCD.
(4) Press the and Cancel buttons at the same time. The
“Reset Menu/Settings Reset” will appear on the LCD.
(5) Press the OK button. The “Settings Reset/ Reset
Exit” will appear on the LCD.
(6) Press the button. The “Reboot OK?/ Yes No”
will appear on the LCD.
(7) Press the button again, and the printer automatically
restarts, the user setting information is deleted, and the
printer goes back to the ready state.
Note:
The printer returns to the ready state automatically if no panel operation is
implemented for 30 seconds.
To Next Page
Loading...
