Brother HL-4570CDW - Page 416

7-26
Confidential
(4) Slide the Roller holder ASSY in the direction of the arrow 4 to remove it from the “C” of the
PF ASSY.
(5) Slide the Roller holder ASSY in the direction of the arrow 5a and 5b in this order to
remove it.
Fig. 7-43
Fig. 7-44
(6) After replacing the Paper feeding kit, reset the counter. (Refer to “2.3 Parts Life Reset
Function” in Chapter 5.)
Assembling Note:
Align the Shaft of the Roller holder ASSY to the hole of the PF ASSY and insert it into
the hole.
Roller holder ASSY
“C”
PF ASSY
5b
5a
4
Roller holder ASSY
PF ASSY
b
a
Hole
Shaft
a
PF ASSY