USB cable scanning
190
12
c Swipe left or right to display (to Image).
d Press (to Image).
The icon moves to the middle and is highlighted in blue.
e Press OK.
Do one of the following:
If you want to use the default settings, go to k .
If you want to change the default settings, go to f.
f Press Options.
g (For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided S can: Long Edge or 2-sided Scan: Short Edge.
h Press Set with Touch Panel.
Press On.
To use Set with T ouch Panel, the ControlCenter software must be installed on the computer that is
connected to the machine.
i Choose the settings for Scan Type, Resolution, File Type, Skip Blank Page
1
and
Remove Background Color as needed.
1
(For MFC-J4710DW)
j Press OK.
k Press Start.
The machine starts scanning the document.
For MFC-J4310DW/J4410DW/J4610DW
12
a Load your document.
b Press Scan.
c Press s or t to display Scan to Image.
d Press Scan to Image.
Do one of the following:
If you want to use the default settings, go to i .
If you want to change the default settings, go to e.
e Press Options.
To Next Page
Loading...
