Bruker RS - Page 41

41
ZTKS0156 / Z31820 / Rev.: 03
Assembling
Removing the upper Transportation Lock
Figure 4.4: Removing the Transportation Lock - step 1
1. Remove the water protection cover (1).
Figure 4.5: Removing the Transportation Lock - step 2
2. Remove the two M 12 nuts (2) and washers.
3. Release the three M 8 nuts (1).
4. Remove the threaded M 8 bolt (3).
5. Release the six M 5 x 14 screws (4).
6. Remove the transport top plate (5).
Figure 4.6: Removing the Transportation Lock - step 3
7. Remove the short top fixture flange (1).
8. Remove the intermediate flange (2).
9. Remove the top fixture flange (3).