Burkert 8228 ELEMENT - Knowing the Available Versions

12
Description
Type 8228
5.3 Knowing the available versions
The following versions of the device are available. Each version is available without or with the display module.
All versions of the device require a power supply of 12-36 V DC.
Process
connection
Outputs
Electrical
connection
Materials
UL
2)
Order code
Conductivity sensor holder Seal of the conductivity sensor
without
display
module
with display
module
G2’’ 1 x transistor,
NPN/PNP, +
1 x 4-20 mA
Male 5-pin M12
fixed connector
PP FKM
1)
no
565 601 566 601
PVDF FKM
1)
565 603 566 603
PEEK FKM
1)
565 605 566 605
PP FKM
1)
yes
565 611 566 611
PVDF FKM
1)
565 613 566 613
PEEK FKM
1)
565 615 566 615
2 x transistor,
NPN/PNP, +
2 x 4-20 mA
Male 5-pin M12
fixed connector +
female 5-pin M12
fixed connector
PP FKM
1)
no
565 602 566 602
PVDF FKM
1)
565 604 566 604
PEEK FKM
1)
565 606 566 606
PP FKM
1)
yes
565 612 566 612
PVDF FKM
1)
565 614 566 614
PEEK FKM
1)
565 616 566 616
Clamp 2’’
(according to
ASME BPE)
1 x transistor
NPN/PNP +
1 x 4...20 mA
Male 5-pin M12
fixed connector
PEEK EPDM
no
567 200 567 478
yes
567 480 567 482
2 x transistors
NPN/PNP +
2 x 4...20 mA
Male 5-pin M12
fixed connector +
female 5-pin M12
fixed connector
PEEK
EPDM
no
567 199 567 479
yes
567 481 567 483
1)
Seal delivered with the device.
2)
identified by the logo on the name plate of the device.
English