Calix ODC-80 - Auxiliary Fuse Fail Alarm

Calix ODC-80 Installation Guide
77
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2003 Calix. All Rights Reserved.
Auxiliary fuse fail alarm
Alarm output
When the alarm occurs, the following message displays:
TID-000 01-09-10 10-15-00
* 001 REPT ALM ENV
"N2-1:MN,FUSE,NSA,9-10,10-15-00,NEND;"
Clearing output
You will see this message once the alarm has been cleared from the system.
TID-000 01-09-10 10-45-00
A 001 REPT EVT ENV
"N2-1:FUSE,CL,9-10,10-45-00;"
Description Severity
The auxiliary fuse fail (FUSE) alarm indicates that one of the GMT
fuses for the auxiliary has failed.
The FUSE alarm will occur as a result of a either an over amperage
condition on the shelf or a defective fuse.
Minor