CHAPTER 4: USING THE DEVICE
MANAGEMENT INTERFACE
PAGE 4-82
Specify the IP address of the proxy server used for internet access from a private
network
Specify the port used on the proxy server for internet access from a private
network
The number of failed refresh (polling) requests to the License Server. The ePMP
Elevate Subscriber Module Limit resets to 1 after the 3
rd
failed refresh request.
The number of failed update (licensing information transfer) requests to the
License Server. The ePMP Elevate Subscriber Module Limit resets to 1 after the
5
th
failed updated request.
Represents whether or not the current time and date have been retrieved from the
configured NTP server
ePMP Elevate
Subscriber Module
Limit
The number of ePMP Elevate devices allowed to register to the AP
Flexible License Management
The "License Key" is obtained from support.cambiumnetworks.com and must be
entered into this field to enable additional functionality (registration capacity,
ePMP Elevate support) of the ePMP device.
Specifies the licensing version scheme for the License Key
The MAC Address is extracted from the License Key and must match the MAC
Address of this device for the licenses to be enacted.
A two character value representing the licensed country
ePMP Lite / Force 110 devices are limited to 10 SMs in AP TDD mode. SM Limit will
display Unlocked if a license is present which allows no limit of SMs to register to
the device in AP TDD mode.
A valid License Key must have a valid signature included. The status is displayed
after a License Key is entered and saved. Licenses can only be used if the
signature is valid.
Tools > Spectrum Analyzer page
Use the Spectrum Analyzer page to measure signal levels of frequencies across the full range of the
device or in a custom range.
To Next Page
Loading...
Need help?
General
