9. Access the Page Setup pane.
10. Select and click a roll paper in the A Paper Source list.
11. Make sure the width of the loaded roll is displayed in the B Roll Width list—in this case, ISO A2/A3 (420.0mm).
Note
• If the width of the roll loaded in the printer is not shown in B Roll Width, click L Printer Infor-
mation on the Main pane to update the printer information.
Enhanced Printing Options
>
Printing enlargements or reductions
>
iPF655
Resizing Originals by Entering a Scaling Value (Mac OS X)
2
87
To Next Page
Loading...
