Messages regarding printing or adjustment
Cannot adjust paper feed. .............................................................................................................................. 893
Check printed document. ............................................................................................................................... 893
Cannot adjust paper feed.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Adj. Quality again, as follows.
1. Press the OK button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.") →P.808
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.") →P.809
4. Execute Adj. Quality again.
(See "Automatic Banding Adjustment (Adj. Quality).") →P.688
Highly transparent film is loaded
that cannot be used for automatic
feed amount adjustment.
Press the OK button to clear the error, and then adjust the feed amount manually.
(See "Manual Banding Adjustment (Adj. Quality).") →P.689
Check printed document.
Cause Corrective Action
The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.
(See "Cleaning the Printhead.") →P.809
Error Message
>
Messages regarding printing or adjustment
>
iPF655
Cannot adjust paper feed.
13
893
To Next Page
Loading...
Need help?
General